clevis pin การใช้

• R-clips are commonly used to secure the ends of round shafts such as axles and clevis pins.
• Normal bolts are manufactured to handle tension loads, whereas clevis pins and bolts are designed to withstand shearing forces.
• The clevis is a U-shaped piece that has holes at the end of the prongs to accept the clevis pin.
• The clevis pin is similar to a bolt, but is only partially threaded or unthreaded with a cross-hole for a split pin.
• The tang is a piece that fits in the space within the clevis and is held in place by the clevis pin.
• Fastening the rail to the bracket is usually a matter of aligning the two members then inserting a clevis pin through mating holes.
• The wires are suspended from a'string'of identical disc-shaped insulators that attach to each other with metal clevis pin or ball and socket links.
• A bolt can function as a clevis pin, but a bolt is not intended to take the lateral stress that a clevis pin must handle.
• A bolt can function as a clevis pin, but a bolt is not intended to take the lateral stress that a clevis pin must handle.
• The segments were fixed together using circumferential tang, clevis, and clevis pin fastening, and sealed with three O-rings ( two prior to the " Challenger"
• Clevis pins should be closely fitted to the holes in the clevis to limit wear and reduce the failure rate of either the pin or the clevis.
• Split pins are frequently used to secure other fasteners, e . g . clevis pins, as well as being used in combination with hardboard discs as a traditional joining technique for teddy bears.
• Ceiling fans are secured by clevis pins locked with either split pins or R-clips, so wobbling won't have an effect on the fan's security, unless of course, the pins / clips were not secured.
• "Mousing " ( pronounced " mouzing " ) is the application of a molly or safety wire, called " mousing wire " in this use, to secure a threaded clevis pin to a shackle.
• This is done by passing a couple of turns of mousing wire through the reach-hole provided for this purpose in the unthreaded end of the clevis pin and around the body of the shackle's hoop.
• A "'shackle "', also known as a "'gyve "', is a U-shaped piece of metal secured with a clevis pin or bolt across the opening, or a hinged metal loop secured with a quick-release locking pin mechanism.